[Tool] Rayglobe Italian Knife Ver 1.7 * TWRP - Root - Debrand ** UPDATE 2-14-16 **

HELP

************************************************** ***********************************************
--------- User Manual HUAWEI MATE 8 Italian knife by Raimondo Martire (aka acer73) V1. 2 ----------
*
*
================================================== ========================================
**************The following points can be activated only with ADB and FASTBOOT active
**
*****0: FIRST START
*****1: BOOTLOADER
*****2: Recovery
*****3: Root
*****4: gapps
*****5: debrand
6: UNBRICK
7: EXTRA
8: Download EMUI
9: Thread Huawei Mate 8 on HDBlog.it
**
*****Q: Donate and Thanks? HELP (hdblog.it) X: CLOSE
================================================== ========================================
*
Before you start remember stop/freeze the antivirus because it may interfere with the download
*
================================================== ========================================
*
MENU 0: First Start
*
In this menu, 'there are two preliminary operations are the driver installation
for the proper functioning of the options adb and software download Hisuite.
Remember not to jump the menu '"First start"
because you will need to verify that you have properly enabled the option "USB debugging" in the menu 'developer
*
================================================== ========================================
*
MENU 1: Bootloader
*
In this menu 'you can use a fast tool for a fee ($4) to unlock the bootloader.
Huawei also provides for an option to unlock via email.
More information in this forum
*
NB. Unlocking the bootloader is necessary if you want to use all options of this tool
*
================================================== ========================================
*
MENU 2: Recovery
*
* 2-1 * The recovery TWRP need to install zip unsigned and root.
* 2-2 * The stock is recovery available with Huawei rom
*
================================================== ========================================
*
MENU 3: Root
*
The root, from the English "root", is a process derived from Linux and applied on
Android to get superuser rights and thus have unrestricted access to the system and to
right to modify it at will by real developers.
It is not nothing but to overcome a barrier and open the huge iron gates behind
which hides the world of modding and custom ROMs.
IMPORTANT: For the root must install the TWRP recovery and have the boot decrypt
*
================================================== ========================================
*
MENU 4: gapps
*
You can install Gapps for Huawei chinese rom. Please consider to decrypt boot before
*
================================================== ========================================
*
MENU 5: debrand
*
It really a pleasure to present this function for switch beetween chinese AL10 model to European L29 Model
*
================================================== ========================================
*
MENU 6: UNBRICK
*
It 'a menu' emergency and experimental enabled only when the smartphone is in brick state

*
================================================== ========================================
*
MENU 7: Extra
*
In this menu, 'there are more frequent reboots: recovery, bootloader and the possibility for the user
to flash their own recovery or a boot image. The files must be placed in the directory
USER
*
================================================== ========================================
*
MENU 8: Download EMUI
*
This menu 'will be active for download roms stock EMUI of the Chinese model.
*
================================================== ========================================
*
MENU 9: Thread Huawei Mate 8 on HDBlog.it
*
Italian forum when I've published first my work
*
================================================== ========================================
*
MENU D: Donate
*
This tool and 'released for purely private. Any commercial use without permission
the author will be prosecuted according to law.
If you want to keep this tool active currency the possibility to donate to the purchase of space
Web and to give me comfort with a glass of good Italian wine
*
================================================== ========================================
*
Menu?: Help
*
To choose the menu 'for help and' exclusively in Italian
*
================================================== ========================================
*
MENU X: Close
*
Closes this tool

Changelog

1.5
Smaller exe
Rayglobe Twrp recovery Multilanguage

1.3
New Twrp multilanguage
Remake Extra section with 2 new stuff

thank you for your help
I have a problem against the software does not recognize my mate 8 I have this red message <waiting for device>, and when I run a command prompt my device is recognized without problems

You are the hero we need, we just didn't know it! Massive thanks for your work mate.

You have driver problem. Have you used driver that I punt in first start command?

Just looking for some more detailed help, ill post the issues I have with understanding.
Sorry if some things I ask are basic or stupid, I have never had an android phone and haven't had the opportunity to check your tool out with a phone yet.

So I just need to run this command (after enabling USB debugging) and that will download everything I need to run the commands?

So whats this first menu do?
Link me to these two places?

What do these mean?
TWRP will be installed on it if I select one?
Then what does the stock one do? Remove TWRP?

How do I get boot decrypt?

Once again, what is decrypt boot?
What happens if I dont have decrypt boot and I do this?
Also what GAPPS are included?

Basically this will flash the european rom on the phone?
Does it work the other way as well, european to chinese?

So if I brick my phone this will be able to fix it most of the time?
What kind of things does it do?

So this menu gives the user the option to boot into different modes?

What does this do? Flash the chinese rom?
Does that mean the chinese to international rom wouldnt work backwards, you need to use this one to do it?

So I just need to run this command (after enabling USB debugging) and that will download everything I need to run the commands?


So whats this first menu do?
Link me to these two places?
Install correct adb driver. remember to activate usb debug in developer menu

What do these mean?
TWRP will be installed on it if I select one?
Then what does the stock one do? Remove TWRP?
Twrp in a custom recovery to flash unsigned zip

How do I get boot decrypt?
In menu 3

Once again, what is decrypt boot?
What happens if I dont have decrypt boot and I do this?
Also what GAPPS are included?
Micro GApps package for chinese rom

Basically this will flash the european rom on the phone?
Does it work the other way as well, european to chinese?
Yes european rom work on chinese model

So if I brick my phone this will be able to fix it most of the time?
What kind of things does it do?


So this menu gives the user the option to boot into different modes?
You can boot in recovery or fastboot mode. Some command can be made in recovery mode other one in bootloader mode

What does this do? Flash the chinese rom?
Does that mean the chinese to international rom wouldnt work backwards, you need to use this one to do it?
Yes you can flash from chinese to european and return to chinese

Hello,
I made this tool for Honor6 and inside!out port it for Honor7 later. We both now merged our tools into one HONOR MultiTool and we still keep it "open" in .bat so anyone can use/port it for other models. I don't get why you "close" it with .exe format.
I see that you add me and inside!out as contributors but i don't want make changes into your OP, so please give me and inside!out the right credits of your port on our work into OP and your Tool.
This is the original HONOR6 MultiTool Thread and this is the port for HONOR7 MultiTool Thread.
Thank you!

Hi I know several people have already asked this, but when I run first run I just get waiting for device. In device manager there's no missing drivers. I can't see where you have the adb driver located. Is it possible to post a link to the correct driver? I was able to install hiSuit, but not able to get the device detected. Does anyone have any other ideas?

hisuite actually has the USB drivers included...