Category:High Speed Steel

**high speed steel**
	subset of tool steels
	Upload media
	Wikipedia
Instance of	type of mixture of chemical entities;
Subclass of	tool steel;
Has use	physical tool;
Authority file
	Q1127242; NDL Authority ID: 00566742
	Reasonator; Scholia; Wikidocumentaries; PetScan; statistics; WikiMap; Locator tool; KML file; Search depicted;

Subcategories

This category has only the following subcategory.

H

Railroad Gazette/Volume 38/Number 5/High-Speed Tool Steel (3 F)

Media in category "High Speed Steel"

The following 32 files are in this category, out of 32 total.

De-Schnellarbeitsstahl.ogg 2.8 s; 26 KB
American engineer and railroad journal (1893) (14572881369).jpg 2,188 × 3,028; 1.37 MB
Bohrer.jpg 488 × 547; 69 KB
Broca mandril.JPG 4,000 × 2,248; 1.38 MB
Broca.JPG 4,000 × 2,248; 1.45 MB
Canadian machinery and metalworking (January-June 1919) (1919) (14597839980).jpg 2,560 × 2,830; 825 KB
Canadian machinery and metalworking (January-June 1919) (1919) (14598621677).jpg 1,329 × 1,942; 362 KB
Canadian machinery and metalworking (January-June 1919) (1919) (14781984001).jpg 1,220 × 1,744; 279 KB
Canadian machinery and metalworking (July-December 1917) (1917) (14590894348).jpg 2,570 × 3,570; 1.25 MB
Cobalt-Drill-Bit HSS-Co-10mm 61674-480x360 (5000494774).jpg 480 × 360; 23 KB
Comparison of relative abrasion resistance at typical working hardness for high-speed tool steels.svg 596 × 452; 74 KB
Comparison of the hot hardness of cobalt-bearing (M4, M33, M36 and T15) vs-ru.svg 723 × 830; 15 KB
Comparison of the hot hardness of cobalt-bearing (M4, M33, M36 and T15) vs. that of noncobalt-bearing (M1, M2, M4, M7 and T1) high-speed tool steels.svg 591 × 695; 246 KB
Drilling a gear wheel on a turning machine.WebM 54 s, 1,920 × 1,080; 22.39 MB
Effect of cobalt content on the hot hardness ot T1 high-speed steel, initial hardness of 66 HRC at different testing temperatures-ru.svg 745 × 745; 3 KB
Effect of cobalt content on the hot hardness ot T1 high-speed steel, initial hardness of 66 HRC at different testing temperatures.svg 384 × 384; 207 KB
Effect of hardness on wear rate for high-speed tool steels, each having been double tempered to the indicated hardness.svg 756 × 637; 201 KB
Electrite Uranium HSS advert in American Machinist v53 n1 1920.png 1,835 × 1,253; 800 KB
Fresa.jpg 588 × 1,572; 65 KB
HSS-E Bohrer.jpg 4,272 × 2,848; 4.21 MB
MillingCutterSlotEndMillBallnose.jpg 1,719 × 1,014; 259 KB
Plot of impact toughness vs hardness for high-speed tool steels.svg 615 × 443; 185 KB
Porte-grain.jpg 1,024 × 768; 274 KB
Relative hardness of alloy carbides, cementite and martensite in high-speed steels.svg 393 × 344; 83 KB
Relative toughness of high-speed tool steels at typical working hardness.svg 591 × 389; 131 KB
Sintering cycles for fully dense sintering of high-speed steels.svg 899 × 345; 506 KB
Slitting saw blades OD 20 mm.jpg 1,600 × 1,067; 105 KB
Spark testing 2.png 979 × 606; 323 KB
Tarauds machine.jpg 410 × 307; 112 KB
Tempering curve for M2 high-speed tool steel de.svg 295 × 217; 117 KB
Tempering curve for M2 high-speed tool steel.svg 295 × 217; 167 KB
Time-temperature-transformation diagram for M2 high-speed tool steel that was annealed prior to quenching.svg 596 × 467; 262 KB