The Wayback Machine - https://web.archive.org/web/20050309001950/http://www.theviolinsite.com:80/violin_making/index.html
The Violin Site

Home | Practice System | Violin Pedagogy | Sheet Music | Recordings | Publications | Violinists

Violin Making

  
Related Links


Have you ever wondered how to make a violin? This section not only shows how to make a violin, but explains about famous violin makers and types of violins.

Famous Violin Makers:

Types of Violins:

  • German Violins
  • Italian Violins
  • Chineese Violins

The Peter Prier Violin Making School in Salt Lake City, Utah has taught close to 500 luthiers over the years. There are 132 violin makers from around the world who have graduated from the school, some very well known for their fine instruments. The following images, from the Prier Violin School, show the process of making a violin from start to finish.

Image 1. Blocks of wook, typically made out of Spruce, Poplar, or Willow, are placed in violin molds made of Walnut wood.

[view larger image]

Image 2. Ribs for the C bouts are bent into shape using a special iron.

[view larger image]

Image 3. C bouts are then attached with glue to the violin mold and clamped into place

[view larger image]

Image 4. After the C bouts are in place, the rest of the ribbing is attached to the blocks.

[view larger image]
Image5. A thin wooden lining is placed inside the ribbing to reinforse the violin when the mold is removed. Image 6. Wood is then chosen for the top, back (Spruce), and scroll (Maple) of the violin. The top and back can be made out of one piece of wood or two pieces glued together.
Image 7. The wood is "arched" or carved into the correct shape. Then a chanel is cut along the perimiter of the top of the violin for the purfling to be placed into. Image 8. The purfling is placed into the chanel and more arching is done to smooth the shape of the top and bottom of the instrument.
Image9. A bass bar is then added to the underside of the top of the violin. Image10. The body of the violin is now complete (3 violin pictures)
Image11. The scroll is then carefully sized. An error as small as a millimeter can completely change the feel of a violin. Image12. The scroll is then carved into the desired shape.

Image13. The fingerboard, made of ebony, is carefully shaved into shape

 Image14.Once pieces of the violin are finished, the instrument is carefully glued. Clamps are placed along the instrument until the glue dries.

 

Cutting Room

 

 

  


Video Practice Exercises

Violin Making - Smithsonian

 

Memorizing Music | Music Technology | Famous Composers | Violin Making
© 2005. The Violin Site is a WideOpenDoors.net sponsored project.  
Google