===> The following configuration options are available for mysql55-server-5.5.62_3:
SSL=on: SSL protocol support
FASTMTX=off: Replace mutexes with spinlocks
===> Use 'make config' to modify these settings
cleanup: Remove expired ports:
2022-06-30 databases/percona56-server: EOL since February 2021
2022-06-30 databases/percona56-client: EOL since February 2021
2022-06-30 databases/mysql55-server: Upstream support ended on December 2018
2022-06-30 databases/mysql55-client: Upstream support ended on December 2018
databases/mysql55-server: Mark DEPRECATED
According to the upstream document
https://www.oracle.com/us/support/library/lifetime-support-technology-069183.pdf
MySQL 5.5 has reached it's Extended Support on December 2018. Under
sustaining support there is no New updates, fixes, security alerts, data
fixes, and critical patch updates. Hence we are setting it to EXPIRE
before 2022Q3.
PR: 263762
Approved by: ale (maintainer)
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
(Only the first 15 lines of the commit message are shown above )
*/*: Remove redundant '-*' from CONFLICTS definitions
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Approved by: portmgr (blanket)
databases/mysql55-server: fix check-plist
An empty directory `info` is created during install; it's
not listed in the plist. Get rid of it.
Not bumping PORTREVISION because the package itself doesn't change.
databases/mysql55-server: fix build on powerpc64 elfv2
Like other SQL servers, Clang has issues compiling this port:
Wrong types for attribute: inalloca nest noalias nocapture nonnull readnone
readonly signext sret zeroext byval dereferenceable(1)
dereferenceable_or_null(1)
%call53 = call signext i32 @my_atomic_cas32(i32* %62, i32* %64, %union.U_32
signext %65)
in function lf_hash_insert
fatal error: error in backend: Broken function found, compilation aborted!
Switch to GCC for now. Since libc++ requires C++11 with GCC, use it instead of
C++98.
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
databases/mysql55-server: Adapt ${name}_limits to the new resource
limiting mechanics for services
Thanks to the recent change to rc.subr(8) it is no longer necessary to
define a resource limiting logic in service scripts. limits(1) is now run
by default and its configuration is handled via the "${name}_limits"
variable.
Unfortunately, there is a collision of variable names. The service scripts
are broken on FreeBSD version with that new change (>= 12.0).
The patch preserves the old behavior on the systems without the rc.subr(8)
modification.
PR: 227228
Reviewed by: krion
Approved by: krion (mentor), maintainer timeout
Differential Revision: https://reviews.freebsd.org/D17818
For ports that are explicitly enabled on armv6, also enable them
on armv7. This has not been tested with an -exp run but should
"do no harm".
PR: 221894 (partial)
MySQL ports: Extend CONFLICTS_INSTALL in conflicting ports.
databases/mysqlwsrep56-server has been present for some time and
databases/mysqlwsrep57-server has been added recently. Both ports
conflict with other MySQL server ports and this has been reflected
in databases/mysqlwsrep5[67]-server/Makefile but must also be
reflected in all conflicting ports' Makefiles as well.
The conflicting ports are:
databases/mariadb100-server
databases/mariadb101-server
databases/mariadb102-server
databases/mariadb55-server
databases/mysql55-server
databases/mysql56-server
(Only the first 15 lines of the commit message are shown above )
Make ninja opt-out in cmake.mk
Using ninja instead of make (1) can lead to significant speed ups while
building.
Therefore switch from having the ninja generator opt-in to having it opt-out.
Previously cmake-ports that wanted to use ninja could set
CMAKE_NINJA=yes
now, ports that do not work with ninja can set
cmake:<existing args>,noninja
Note, that needing this should be an exception and most often points to a broken
cmake of the port.
The ports using cmake were modified
* removed USES=gmake, if ninja is used
* removed MAKE_ARGS, if ninja is used
* added the cmake-argument noninja if necessary
PR: 219629
PR: 213331
Exp-run by: antoine
Reviewed by: rakuco
Differential Revision: https://reviews.freebsd.org/D10748
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
For ARMv6, declare FPSETMASK 0 and FEDISABLEEXCEPT 1. This allows mysql server
to
build on ARMv6.
No need to bump portrevision for everyone else here as this only affects ARM
users.
PR: 195750
Submitted by: mikael.urankar@gmail.com
Approved by: mentor (implicit)
Fix mysql51/55/56 build with clang on i386.
The included yassl library contains inline asm (only for i386) using
intel syntax which clang does not support. For now, just disable the
inline asm when clang is used and use the standard C implementation like
on every other architecture.
Approved by: ale (maintainer)
Add a patch to lower the valid range of mysql read/write/wait timeouts.
Such timeouts are implemented via setsockopt that doesn't accept values
larger than (INT_MAX / kern.hz).
In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().
In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.
