The Wayback Machine - https://web.archive.org/web/20250110121506/https://www.geeksforgeeks.org/java-io-bufferedreader-class-java/

Java.io.BufferedReader Class in Java

Last Updated : 03 May, 2022

Reads text from a character-input stream, buffering characters so as to provide for the efficient reading of characters, arrays, and lines. The buffer size may be specified, or the default size may be used. The default is large enough for most purposes. In general, each read request made by a Reader causes a corresponding read request to be made of the underlying character or byte stream. It is therefore advisable to wrap a BufferedReader around any Reader whose read() operations may be costly, such as FileReaders and InputStreamReaders. Programs that use DataInputStreams for textual input can be localized by replacing each DataInputStream with an appropriate BufferedReader.

Constructors of BufferedReader Class

Constructor	Action Performed
BufferedReader(Reader in)	Creates a buffering character-input stream that uses a default-sized input buffer
BufferedReader(Reader in, int sz)	Creates a buffering character-input stream that uses an input buffer of the specified size.

Methods of BufferedReader Class

Method Name	Action
close()	Closes the stream and releases any system resources associated with it.Once the stream has been closed, further read(), ready(), mark(), reset(), or skip() invocations will throw an IOException. Closing a previously closed stream has no effect.
mark()	Marks the present position in the stream. Subsequent calls to reset() will attempt to reposition the stream to this point.
markSupported()	Tells whether this stream supports the mark() operation, which it does.
read()	Reads a single character.
read(char[] cbuf, int off, int len)	Reads characters into a portion of an array. This method implements the general contract of the corresponding read method of the Reader class. As an additional convenience, it attempts to read as many characters as possible by repeatedly invoking the read method of the underlying stream.
readLine()	Reads a line of text. A line is considered to be terminated by any one of a line feed (‘\n’), a carriage return (‘\r’), or a carriage return followed immediately by a line feed.
ready()	Tells whether this stream is ready to be read.
reset()	Resets the stream to the most recent mark.
skip(long)	Skips characters.

Implementation: The content inside the file is as follows:

This is first line
this is second line

Example

Java

// Java Program to Illustrate BufferedReader Class 
// Via Its Methods 
  
// Importing required classes 
import java.io.BufferedReader; 
import java.io.FileReader; 
import java.io.IOException; 
  
// Class 
class GFG { 
  
    // Main driver method 
    public static void main(String[] args) 
        throws IOException 
    { 
  
        // Creating object of FileReader and BufferedReader 
        // class 
        FileReader fr = new FileReader("file.txt"); 
        BufferedReader br = new BufferedReader(fr); 
  
        char c[] = new char[20]; 
  
        // Illustrating markSupported() method 
        if (br.markSupported()) { 
  
            // Print statement 
            System.out.println( 
                "mark() method is supported"); 
  
            // Illustrating mark method 
            br.mark(100); 
        } 
  
        // File Contents is as follows: 
        // This is first line 
        // this is second line 
  
        // Skipping 8 characters 
        br.skip(8); 
  
        // Illustrating ready() method 
        if (br.ready()) { 
  
            // Illustrating readLine() method 
            System.out.println(br.readLine()); 
  
            // Illustrating read(char c[],int off,int len) 
            br.read(c); 
  
            for (int i = 0; i < 20; i++) { 
                System.out.print(c[i]); 
            } 
  
            System.out.println(); 
  
            // Illustrating reset() method 
            br.reset(); 
            for (int i = 0; i < 8; i++) { 
  
                // Illustrating read() method 
                System.out.print((char)br.read()); 
            } 
        } 
    } 
}

Output:

mark() method is supported
first line
this is second line
This is

Java.io.BufferedInputStream class in Java

N

Nishant Sharma

News

Improve

Article Tags :

Practice Tags :

Java

Similar Reads

Java.io.BufferedReader Class in Java

Reads text from a character-input stream, buffering characters so as to provide for the efficient reading of characters, arrays, and lines. The buffer size may be specified, or the default size may be used. The default is large enough for most purposes. In general, each read request made by a Reader

Java.io.BufferedInputStream class in Java

A BufferedInputStream adds functionality to another input stream-namely, the ability to buffer the input and to support the mark and reset methods. When the BufferedInputStream is created, an internal buffer array is created. As bytes from the stream are read or skipped, the internal buffer is refil

Java.io.BufferedOutputStream class in Java

Java.io.BufferedInputStream class in Java Java.io.BufferedOutputStream class implements a buffered output stream. By setting up such an output stream, an application can write bytes to the underlying output stream without necessarily causing a call to the underlying system for each byte written. Fie

Java.io.BufferedWriter class methods in Java

Bufferreader class writes text to character-output stream, buffering characters.Thus, providing efficient writing of single array, character and strings. A buffer size needs to be specified, if not it takes Default value. An output is immediately set to the underlying character or byte stream by the

Java.io.CharArrayReader Class in Java

java.io.CharArrayReader class creates a character buffer using a character array. Declaration: public class CharArrayReader extends Reader Constructor : CharArrayReader(char[] char_array) : Creates a CharArrayReader from a specified character array.CharArrayReader(char[] char_array, int offset, int

java.nio.Buffer Class in Java

The Buffer class provides a buffer or a container for data chunks of specific primitive types. A finite sequence of elements is stored linearly in a buffer. Important properties of a buffer that make it convenient to perform read and write operations in the data are: Capacity: This property determin

Java.io.ByteArrayInputStream class in Java

ByteArrayInputStream class of java.io package contains all the buffers, containing bytes to be read from the Input Stream. There is no IO exception in case of ByteArrayInputStream class methods. Methods of this class can be called even after closing the Stream, there is no effect of it on the class

java.nio.ByteBuffer Class in Java

ByteBuffer holds a sequence of integer values to be used in an I/O operation. The ByteBuffer class provides the following four categories of operations upon long buffers: Absolute and relative get method that read single bytes.Absolute and relative put methods that write single bytes.Relative bulk p

Java.io.FilterReader class in Java

Abstract class for reading filtered character streams. The abstract class FilterReader itself provides default methods that pass all requests to the contained stream. Subclasses of FilterReader should override some of these methods and may also provide additional methods and fields. Constructor : pr

Difference Between Scanner and BufferedReader Class in Java

In Java, Scanner and BufferedReader class are sources that serve as ways of reading inputs. Scanner class is a simple text scanner that can parse primitive types and strings. It internally uses regular expressions to read different types while on the other hand BufferedReader class reads text from a

Why Does BufferedReader Throw IOException in Java?

IOException is a type of checked exception which occurs during input/output operation. BufferedReader is used to read data from a file, input stream, database, etc. Below is the simplified steps of how a file is read using a BufferedReader in java. In RAM a buffered reader object is created.Some lin

Java.io.Reader class in Java

Java Reader class is an abstract class for reading character streams. The only methods that a subclass must implement are read(char[], int, int), and close(). Most subclasses, however, will override some of the methods defined here in order to provide higher efficiency, additional functionality, or

BufferedReader close() method in Java with Examples

The close() method of BufferedReader class in Java is used to close the stream and release all the system resources associated with the stream operations. Syntax: public void close() throws IOException Parameters: This method does not accept any parameter. Return value: This method does not return a

Java.io.Writer Class in Java

java.io.Writer class is an abstract class. It is used to write to character streams. Declaration of Writer Class in Javapublic abstract class Writer extends Object implements Appendable, Closeable, FlushableConstructors of Java Writer Classprotected Writer(): Creates a new character stream that can

BufferedReader read() method in Java with Examples

The read() method of BufferedReader class in Java is of two types: 1. The read() method of BufferedReader class in Java is used to read a single character from the given buffered reader. This read() method reads one character at a time from the buffered stream and return it as an integer value. Synt

BufferedReader ready() method in Java with Examples

The ready() method of BufferedReader class in Java is used to verify whether the buffer stream is ready to be read or not. A buffer stream is said to be ready in two cases either the buffer is not empty or the main stream is ready. Syntax: public boolean ready() throws IOException Overrides: This me

BufferedReader Class lines() method in Java with Examples

BufferedReader.lines() is the method of the Java Buffered Reader Class in the Java Library which returns lines in terms of Stream and from this Buffered Reader class. With the help of the stream, there are a lot of methods that mimic the output according to our needs. Syntax: BufferedReader.lines()

BufferedReader mark() method in Java with Examples

The mark() method of BufferedReader class in Java is used to mark the current position in the buffer reader stream. The reset() method of the same BufferedReader class is also called subsequently, after the mark() method is called. The reset() method fixes the position at the last marked position so

Java.io.FileDescriptor in Java

java.io.FileDescriptor class in Java works for opening a file having a specific name. If there is any content present in that file it will first erase all that content and put "Beginning of Process" as the first line. Instances of the file descriptor class serve as an opaque handle to the underlying